SarkariResultHome.comOCT Prescribed Qualification Exam Admit Card 2026
Written by Jigs on 31 Oct 2026 · Organisation: OCT · State: All India
OCT has released the admit card on its official portal for Prescribed Qualification. Candidates can download it with their registration number and date of birth.
There are 30 vacancies. Take a printout and carry a photo ID to the exam centre. The direct link is in the Important Links table below.
You can also see more OCT updates on the OCT Recruitment page, all admit cards and the home page.
OCT Prescribed Qualification Admit Card 2026: Important Dates & Exam Details
| Important Dates | Exam Day Details |
|---|---|
|
|
| Age Limit | Total Vacancies |
|---|---|
| 30total posts |
OCT Prescribed Qualification Selection Process & Exam Details
Selection normally runs in this order for this kind of Sarkari Naukri. The official notice has the final word, so check it for the exact rounds.
- Written Examination
- Document Verification
- Merit List
Your Next Steps After the Admit Card
Sometimes an exam city slip comes first and the admit card follows a few days later. Download both early, because the website slows down on the last day, and keep two printouts ready.
Recruitments like Given Qualification usually go through Written Examination, Document Verification and Merit List. The official notice gives the exact rounds and dates.
Given Qualification: Key Details at a Glance
The table below gives the key details at a glance of Given Qualification, as it is given in the source.
| Detail | Information |
|---|---|
| Recruiting Organization | Railway Recruitment Cell (RRC), North Central Railway (NCR), Prayagraj |
| Address of RRC | Balmiki Chauraha, Nawab Yusuf Road, Prayagraj-211001 |
| Notification Number | GDCE Notification No. RRC/NCR/GDCE - 01/2026 |
| Date of Publication of Notification | 28.09.2026 |
| Recruitment Type | GDCE (against GDCE Quota) – for eligible serving regular employees having lien in North Central Railway (except RPF/RPSF) |
| Posts | Assistant Loco Pilot, Technician Gr-I and Gr-III, Junior Engineer, Commercial cum Ticket Clerk, Junior Clerk cum Typist |
| Total Vacancies | 656 (sum of the post-wise vacancies in Annexure-E; the notification does not state a separate grand total) |
| Application Mode | Online only, through the link on www.rrcpryj.org |
| Job Location | North Central Railway (selected employees are liable to be posted anywhere in NCR; specific stations are not listed in the notification) |
| Selection Process | Single-stage Computer Based Test (CBT), Aptitude Test / Typing Skill Test (wherever applicable), Document Verification and Medical Examination |
| Official Website | www.rrcpryj.org |
Given Qualification: RRC NCR GDCE Important Dates
Check the rrc ncr gdce important dates for Given Qualification in the table below.
| Detail | Information |
|---|---|
| Event | Date |
| Date of Publication of Notification | 28.09.2026 |
| Opening Date of Online Application (Apply Online Start Date) | 01.10.2026 |
| Closing Date and Time of Online Application (Last Date) | 30.10.2026 at 23:59 hrs |
| Age and Date of Birth Reckoning Date | 01.01.2027 |
| CBT, Aptitude Test, Document Verification and Medical Examination Dates | Not specified in the notification |
Given Qualification: Assistant Loco Pilot (ALP) Vacancy
Check the assistant loco pilot (alp) vacancy for Given Qualification in the table below.
| S. No. | Post Name | No. of Posts |
|---|---|---|
| 1 | Assistant Loco Pilot (Electrical Department) | 428 (UR: 245, OBC: 112, SC: 49, ST: 22) |
Given Qualification: Technician (All Departments) Vacancy
Check the technician (all departments) vacancy for Given Qualification in the table below.
| S. No. | Post Name | No. of Posts |
|---|---|---|
| 2 | Technician-I / Signal (Sig & Tele) | 3 (UR: 2, OBC: 1, SC: 0, ST: 0) |
| 3 | Technician-I / Telecom (Sig & Tele) | 2 (UR: 1, OBC: 1, SC: 0, ST: 0) |
| 4 | Technician-III / Blacksmith (Engineering) | 12 (UR: 9, OBC: 1, SC: 1, ST: 1) |
| 5 | Technician-III / TRD (Electrical) | 2 (UR: 1, OBC: 0, SC: 0, ST: 1) |
| 6 | Technician-III / TMC (Engineering) | 13 (UR: 5, OBC: 5, SC: 2, ST: 1) |
| 7 | Technician-III / Bridge (Engineering) | 1 (UR: 1, OBC: 0, SC: 0, ST: 0) |
| 8 | Technician-III / Signal (Sig & Tele) | 9 (UR: 5, OBC: 2, SC: 1, ST: 1) |
| 9 | Technician-III / Telecom (Sig & Tele) | 1 (UR: 1, OBC: 0, SC: 0, ST: 0) |
| 10 | Technician-III / Fitter (Mechanical) | 3 (UR: 3, OBC: 0, SC: 0, ST: 0) |
| 11 | Technician-III / Fitter (WS) (Mechanical) | 8 (UR: 4, OBC: 2, SC: 1, ST: 1) |
| 12 | Technician-III (Mill Wright) (WS) (Mechanical) | 1 (UR: 1, OBC: 0, SC: 0, ST: 0) |
| 13 | Technician-III (Machinist) (WS) (Mechanical) | 1 (UR: 1, OBC: 0, SC: 0, ST: 0) |
| 14 | Technician-III / Welder (WS) (Mechanical) | 4 (UR: 2, OBC: 1, SC: 1, ST: 0) |
| 15 | Technician-III / Welder (Engineering) | 1 (UR: 1, OBC: 0, SC: 0, ST: 0) |
Given Qualification: Junior Engineer (All Departments) Vacancy
Check the junior engineer (all departments) vacancy for Given Qualification in the table below.
| S. No. | Post Name | No. of Posts |
|---|---|---|
| 16 | JE / Carriage & Wagon (Mechanical) | 4 (UR: 4, OBC: 0, SC: 0, ST: 0) |
| 17 | JE / Drawing & Design (Engineering) | 4 (UR: 3, OBC: 1, SC: 0, ST: 0) |
| 18 | JE / Drawing (Electrical) | 1 (UR: 1, OBC: 0, SC: 0, ST: 0) |
| 19 | JE / Signal (Sig & Tele) | 1 (UR: 1, OBC: 0, SC: 0, ST: 0) |
| 20 | JE / Telecom (Sig & Tele) | 1 (UR: 1, OBC: 0, SC: 0, ST: 0) |
| 21 | JE / Works (Engineering) | 8 (UR: 5, OBC: 2, SC: 1, ST: 0) |
| 22 | JE / TRS (Electrical) | 4 (UR: 2, OBC: 1, SC: 1, ST: 0) |
| 23 | JE / P Way (Engineering) | 28 (UR: 16, OBC: 6, SC: 4, ST: 2) |
| 24 | JE / TMC (Engineering) | 4 (UR: 2, OBC: 1, SC: 1, ST: 0) |
| 25 | JE / (General) (Electrical) | 2 (UR: 1, OBC: 1, SC: 0, ST: 0) |
| 26 | JE (Mech.) (Mechanical) | 3 (UR: 2, OBC: 1, SC: 0, ST: 0) |
Given Qualification: NTPC (Non-Graduate Quota) Vacancy
NTPC (Non-Graduate Quota) Vacancy of Given Qualification:
| S. No. | Post Name | No. of Posts |
|---|---|---|
| 27 | Commercial cum Ticket Clerk (Commercial Department) | 104 (UR: 65, OBC: 8, SC: 18, ST: 13) |
| 28 | Junior Clerk cum Typist (Personnel Department) | 3 (UR: 1, OBC: 1, SC: 1, ST: 0) |
Given Qualification: NCR GDCE 2026 Vacancy Summary
Check the ncr gdce 2026 vacancy summary for Given Qualification in the table below.
| S. No. | Post Group | No. of Posts |
|---|---|---|
| 1 | Assistant Loco Pilot (ALP) | 428 |
| 2 | Technician (All Departments) | 61 |
| 3 | Junior Engineers (All Departments) | 60 |
| 4 | NTPC (Non-Graduate Quota) | 107 |
| Total (sum of Annexure-E post-wise vacancies) | 656 |
Given Qualification: PwBD Vacancies (Horizontal Reservation)
PwBD Vacancies (Horizontal Reservation) of Given Qualification:
| S. No. | Post Name | PwBD Vacancies |
|---|---|---|
| 1 | Assistant Loco Pilot | Not Applicable |
| 2 | Technician-I / Signal | VI: NA, HI: NA, LD: 0, MD: NA |
| 3 | Technician-I / Telecom | VI: NA, HI: NA, LD: 0, MD: NA |
| 4 | Technician-III / Blacksmith | VI: NA, HI: 0, LD: 0, MD: 1 |
| 5 | Technician-III / TRD | VI: NA, HI: 0, LD: 0, MD: 0 |
| 6 | Technician-III / TMC | VI: NA, HI: 0, LD: 0, MD: 0 |
| 7 | Technician-III / Bridge | VI: NA, HI: NA, LD: NA, MD: NA |
| 8 | Technician-III / Signal | VI: NA, HI: NA, LD: 0, MD: NA |
| 9 | Technician-III / Telecom | VI: NA, HI: NA, LD: 1, MD: NA |
| 10 | Technician-III / Fitter | VI: 0, HI: 0, LD: 0, MD: 1 |
| 11 | Technician-III / Fitter (WS) | VI: 1, HI: 0, LD: 0, MD: 0 |
| 12 | Technician-III (Mill Wright) (WS) | VI: NA, HI: 0, LD: 0, MD: 0 |
| 13 | Technician-III (Machinist) (WS) | VI: NA, HI: NA, LD: 0, MD: NA |
| 14 | Technician-III / Welder (WS) | VI: NA, HI: 0, LD: 0, MD: 0 |
| 15 | Technician-III / Welder | VI: NA, HI: 0, LD: 0, MD: 0 |
| 16 | JE / Carriage & Wagon | VI: NA, HI: NA, LD: NA, MD: NA |
| 17 | JE / Drawing & Design | VI: NA, HI: 1, LD: NA, MD: NA |
| 18 | JE / Drawing (Electrical) | VI: NA, HI: 0, LD: 0, MD: 0 |
| 19 | JE / Signal | VI: NA, HI: NA, LD: NA, MD: NA |
| 20 | JE / Telecom | VI: NA, HI: NA, LD: 0, MD: NA |
| 21 | JE / Works | VI: NA, HI: NA, LD: 1, MD: NA |
| 22 | JE / TRS | VI: NA, HI: 1(HH), LD: 0, MD: 0 |
| 23 | JE / P Way | VI: NA, HI: NA, LD: 3, MD: NA |
| 24 | JE / TMC | VI: NA, HI: NA, LD: 0, MD: NA |
| 25 | JE / (General) | VI: NA, HI: 1, LD: 0, MD: 0 |
| 26 | JE (Mech.) | VI: NA, HI: 0, LD: 1, MD: 0 |
| 27 | Commercial cum Ticket Clerk | VI: 0, HI: 2, LD: 3, MD: 1 |
| 28 | Junior Clerk cum Typist | VI: 0, HI: 0, LD: 0, MD: 0 |
Given Qualification: ALP and Technician Qualification
The table below gives the alp and technician qualification of Given Qualification, as it is given in the source.
| Detail | Information |
|---|---|
| Post | Prescribed Qualification |
| Assistant Loco Pilot (Pay Level 2, Electrical) | (A) Matriculation / SSLC plus ITI from recognized institutions of NCVT/SCVT in the trades of Fitter, Electrician, Instrument Mechanic, Millwright/Maintenance Mechanic, Mechanic (Radio & TV), Electronics Mechanic, Mechanic (Motor Vehicle), Wireman, Tractor Mechanic, Armature & Coil Winder, Mechanic (Diesel), Heat Engine, Turner, Machinist, Refrigeration & Air-Conditioning Mechanic; OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trades mentioned above; OR (B) Matriculation / SSLC plus three years Diploma in Mechanical / Electrical / Electronics / Automobile Engineering, or a combination of various streams of these Engineering disciplines, from a recognized Institution in lieu of ITI. Degree in the above Engineering disciplines is also acceptable in lieu of Diploma in Engineering. |
| Technician-I Signal / Tele (Pay Level 5, Sig & Tele) | (A) Bachelor of Science in Physics / Electronics / Computer Science / Information Technology / Instrumentation from a recognized University/Institute, OR B.Sc. in a combination of any sub-stream of these basic streams; OR (B) Three years Diploma in Engineering in the above basic streams or in a combination of any of them, OR Degree in Engineering in the above basic streams or in a combination of any of them. |
| Technician-III (Sig & Tele) (Pay Level 2) | (A) Matriculation / SSLC plus ITI certificate from recognized institutions of NCVT/SCVT in the trades of Electronics Mechanic / Electrician / Wireman; OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trade mentioned above; OR (B) 10+2 with Physics and Maths. |
| Technician-III / Fitter and Technician-III / Fitter (Workshop) (Pay Level 2, Mechanical) | Matriculation / SSLC plus ITI from recognized institutions of NCVT/SCVT in the trade of Fitter; OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trade mentioned above. |
| Technician-III / Machinist (Workshop) (Pay Level 2, Mechanical) | Matriculation / SSLC plus ITI in the trade of Machinist / Turner / Machinist (Grinder) / Operator Advanced Machine Tool; OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trade mentioned above. |
| Technician-III / Millwright (Workshop) (Pay Level 2, Mechanical) | Matriculation / SSLC plus ITI in the trade of Millwright Maintenance Mechanic / Mechanic Machine Tool Maintenance / Mechanic Advanced Machine Tool Maintenance; OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trade mentioned above. |
| Technician-III / Welder (Workshop) (Mechanical) and Technician-III / Welder (Engineering) (Pay Level 2) | Matriculation / SSLC plus ITI in the trade of Welder / Welder (Gas and Electric) / Welder (Structural) / Welder (Pipe) / Welder (TIG/MIG) / Welder (Fabrication and Fitting); OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trade mentioned above. |
| Technician-III / Electrical (TRD) (Pay Level 2, Electrical) | Matriculation / SSLC plus ITI in the trade of Electrician / Wireman / Mechanic (HT, LT Equipment and Cable Jointing) / Electronics Mechanic; OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trade mentioned above. |
| Technician-III / Blacksmith (Pay Level 2, Engineering) | Matriculation / SSLC plus ITI in the trade of Forger and Heat Treater / Foundryman / Pattern Maker / Moulder (Refractory); OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trade mentioned above. |
| Technician-III / Track Machine (Pay Level 2, Engineering) | Matriculation / SSLC plus ITI in the trade of Fitter / Electrician / Electronics Mechanic / Instrument Mechanic / Mechanic Mechatronics / Mechanic Diesel / Mechanic (Motor Vehicle) / Welder / Machinist; OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trade mentioned above. |
| Technician-III / Bridge (Pay Level 2, Engineering) | Matriculation / SSLC plus ITI in the trade of Fitter / Fitter (Structural) / Welder; OR Matriculation / SSLC plus Course Completed Act Apprenticeship in the trade mentioned above. |
Given Qualification: Junior Engineer (JE) Qualification
Junior Engineer (JE) Qualification of Given Qualification:
| Detail | Information |
|---|---|
| Post | Prescribed Qualification |
| JE / Electrical (TRS); JE / Electrical / General Services (Pay Level 6) | Three years Diploma in (a) Mechanical / Electrical / Electronics Engineering OR (b) a combination of any sub-stream of basic streams of Mechanical / Electrical / Electronics Engineering from a recognized University/Institute. |
| JE / P-Way; JE / Civil (Design Drawing and Estimation); JE / Works (Pay Level 6, Engineering) | (A) Three years Diploma in Civil Engineering or B.Sc. in Civil Engineering of three years duration OR (B) a combination of any sub-stream of basic streams of Civil Engineering from a recognized University/Institute. |
| JE / Mechanical (C & W); JE / Mechanical (Workshop) (Pay Level 6) | Three years Diploma in (A) Mechanical / Electrical / Electronics / Manufacturing / Mechatronics / Industrial / Machining / Instrumentation and Control / Tools and Machining / Tools and Die Making / Automobile / Production Engineering OR (B) a combination of any sub-stream of these basic streams from a recognized University/Institute. |
| JE / S and T / Signal; JE / S and T / Telecommunication (Pay Level 6) | Three years Diploma in (a) Electrical / Electronics / Information Technology / Communication Engineering / Computer Science and Engineering / Computer Science / Computer Engineering OR (b) a combination of any sub-stream of these basic streams from a recognized University/Institute. |
| JE / Track Machine (Pay Level 6, Engineering) | (a) Three years Diploma in Mechanical / Production / Automobile / Electrical / Electronics / Instrumentation and Control Engineering OR (b) a combination of any sub-stream of these basic streams from a recognized University/Institute. |
Given Qualification: Commercial cum Ticket Clerk and Junior Clerk cum Typist Qualification
Check the commercial cum ticket clerk and junior clerk cum typist qualification for Given Qualification in the table below.
| Detail | Information |
|---|---|
| Post | Prescribed Qualification |
| Commercial cum Ticket Clerk (Pay Level 3, Commercial) | 12th (+2 stage) or its equivalent with not less than 50% marks in the aggregate. 50% marks is not to be insisted upon in the case of SC/ST/Persons with Benchmark Disability/Ex-Servicemen and candidates who possess qualifications higher than 12th (+2 stage). |
| Junior Clerk cum Typist (Pay Level 2, Personnel) | 12th (+2 stage) or its equivalent with not less than 50% marks in the aggregate (same relaxation as above). Typing proficiency in English/Hindi on Computer is essential. |
Given Qualification: ITI Trade and JE Exam Group Mapping
The table below gives the iti trade and je exam group mapping of Given Qualification, as it is given in the source.
| Engineering Discipline (Diploma/Degree) | Relevant Trade for Qualifying Test (ALP) |
|---|---|
| Electrical Engineering and combination of various streams of Electrical Engineering | Electrician / Instrument Mechanic / Wiremen / Winder (Armature) / Refrigeration and Air Conditioning Mechanic |
| Electronics Engineering and combination of various streams of Electronics Engineering | Electronics Mechanic / Mechanic Radio & TV |
| Mechanical Engineering and combination of various streams of Mechanical Engineering | Fitter / Mechanic Motor Vehicle / Tractor Mechanic / Mechanic Diesel / Turner / Machinist / Refrigeration and Air Conditioning Mechanic / Heat Engine / Millwright / Maintenance Mechanic |
| Automobile Engineering and combination of various streams of Automobile Engineering | Mechanic Motor Vehicle / Tractor Mechanic / Mechanic Diesel / Heat Engine / Refrigeration and Air Conditioning Mechanic |
Given Qualification: ITI Trade and JE Exam Group Mapping
Check the iti trade and je exam group mapping for Given Qualification in the table below.
| Three Years Diploma / Bachelor's Degree in Engineering or Technology (JE) | Exam Group |
|---|---|
| Mechanical, Production, Automobile, Manufacturing, Mechatronics, Industrial, Machining, Tools and Machining, Tools and Die Making Engineering, or a combination of any sub-stream of these | Mechanical and Allied Engineering |
| Electrical Engineering, or a combination of any sub-stream of Electrical Engineering | Electrical and Allied Engineering |
| Electronic, Instrumentation and Control, Communication, Computer Science and Engineering, Computer Engineering, Computer Science, Information Technology Engineering, or a combination of sub-streams of these | Electronics and Allied Engineering |
| Civil Engineering, or a combination of any sub-stream of Civil Engineering; B.Sc. in Civil Engineering of 3 years duration | Civil and Allied Engineering |
Given Qualification: RRC NCR GDCE Age Limit
Check the rrc ncr gdce age limit for Given Qualification in the table below.
| Category | Upper Age Limit | Date of Birth (Not Earlier Than) | Date of Birth (Not Later Than) |
|---|---|---|---|
| UR | 42 years | 02.01.1985 | 01.01.2009 |
| OBC | 45 years | 02.01.1982 | 01.01.2009 |
| SC/ST | 47 years | 02.01.1980 | 01.01.2009 |
Given Qualification: RRC NCR GDCE Salary
Check the rrc ncr gdce salary for Given Qualification in the table below.
| Post | Department | 7th CPC Pay Level | Medical Standard |
|---|---|---|---|
| Assistant Loco Pilot | Electrical | Level 2 | A1 |
| Technician-I / Signal and Telecom | Sig & Tele | Level 5 | B1 |
| Technician-III / Signal and Telecom | Sig & Tele | Level 2 | B1 |
| Technician-III / Fitter; Blacksmith (Engineering); Welder (Engineering); Bridge; Electrical (TRD) | Mechanical / Engineering / Electrical | Level 2 | B1 |
| Technician-III / Fitter (WS); Machinist (WS); Millwright (WS); Welder (WS) | Mechanical | Level 2 | C1 |
| Technician-III / Track Machine (TMC) | Engineering | Level 2 | A3 |
| JE / Electrical (TRS); JE / P-Way; JE / Signal; JE / Telecom; JE / Track Machine | Electrical / Engineering / S and T | Level 6 | A3 |
| JE / Electrical / General Services; JE / Works; JE / Mechanical (C & W) | Electrical / Engineering / Mechanical | Level 6 | B1 |
| JE / Civil (Design Drawing and Estimation) [JE / Drawing & Design]; JE / Drawing (Electrical); JE / Mechanical (Workshop) [JE (Mech.)] | Engineering / Mechanical | Level 6 | C1 |
| Commercial cum Ticket Clerk | Commercial | Level 3 | B2 |
| Junior Clerk cum Typist | Personnel | Level 2 | C2 |
Given Qualification: PwBD Suitability of Posts
PwBD Suitability of Posts of Given Qualification:
| Post | VI | HI | LD | MD |
|---|---|---|---|---|
| Assistant Loco Pilot | No | No | No | No |
| Technician-I Signal/Tele; Technician-III (Sig & Tele) | No | No | OL, LC, DW, AAV, SD (Without N/LDf), SI (Without N/L Df) | No |
| Technician-III / Fitter; Fitter (Workshop) | No | D, HH | OL, BL, LC, DW, AAV, SD (Without N/L Df), SI (Without N/L Df) | Yes |
| Technician-III / Machinist (Workshop) | No | No | OL, LC, DW, AAV, SD (Without N/LDf), SI (Without N/L Df) | No |
| Technician-III / Millwright (Workshop); Welder (Workshop); Electrical (TRD); Blacksmith; Welder; Track Machine | No | D, HH | OL, LC, DW, AAV, SD (Without N/LDf), SI (Without N/L Df) | Yes |
| Technician-III / Bridge | No | No | No | No |
| JE / Electrical (TRS); JE / Electrical / General Services | No | D, HH | OL, LC, DW, AAV, SD/SI (Without N/L Df) | Yes |
| JE / P-Way; JE / Works; JE / Mechanical (C & W); JE / Track Machine | No | No | OL, LC, DW, AAV, SD/SI (Without N/L Df) | No |
| JE / Civil (Design Drawing and Estimation) | No | No | OL with below knee, LC, DW, AAV, SD/SI (Without N/L Df) | No |
| JE / Mechanical (Workshop) | No | D, HH | OA, OL, LC, DW, AAV, SD/SI (Without N/L Df) | Yes |
| JE / S and T / Signal | No | No | No | No |
| JE / S and T / Telecommunication | No | No | OA, OL, LC, DW, AAV, SD/SI (Without N/L Df) | No |
| Commercial cum Ticket Clerk | No | D, HH | OA, OL, MW, LC, DW, AAV, SD (Without neurological/limb dysfunction), SI (Without neurological/limb Dysfunction) | Yes |
| Junior Clerk cum Typist | B, LV | D, HH | OA, OL, OAL, BL, LC, DW, AAV, SD (Without neurological/limb dysfunction), SI (Without neurological/limb Dysfunction) | Yes |
Given Qualification: RRC NCR GDCE Selection Process
The table below gives the rrc ncr gdce selection process of Given Qualification, as it is given in the source.
| Post | Stages of Exam | Choice to Indicate in the Online Application |
|---|---|---|
| Assistant Loco Pilot | CBT, Aptitude Test, DV, Medical Exam | ITI trade from which the candidate wishes to appear in the Qualifying Test |
| Technicians | CBT, DV, Medical Exam | ITI trade from which the candidate wishes to appear in the Qualifying Test |
| Junior Engineers | CBT, DV, Medical Exam | Exam Group for the "Technical Abilities" part of the JE Group Examination |
| Commercial cum Ticket Clerk | CBT, DV, Medical Exam | Not applicable |
| Junior Clerk cum Typist | CBT, CBTST, DV, Medical Exam | Not applicable |
Given Qualification: Exam Pattern and Marks
Check the exam pattern and marks for Given Qualification in the table below.
In short: mode: Computer Based Test (CBT); time: 120 minutes; negative marking: none.
| Post Group | Duration | Questions and Subject-wise Distribution |
|---|---|---|
| Assistant Loco Pilot | 120 minutes | Maximum 100 questions of 1 mark each (100 marks): Mathematics 25%, General Intelligence & Reasoning 25%, Basic Science & Engineering 25%, Trade Specific Section 25% (around 25 questions). Four options per question. |
| Technician Gr-I S&T (Pay Level 5) | 90 minutes (120 minutes for PwBD candidates availing a Scribe) | 100 questions: General Awareness 10, General Intelligence and Reasoning 15, Basics of Computers and Applications 20, Mathematics 20, Basic Science and Engineering 35. |
| Technician Gr-III (Pay Level 2) | 90 minutes (120 minutes for PwBD candidates availing a Scribe) | 100 questions: Mathematics 25, General Intelligence & Reasoning 25, General Science 40, General Awareness 10. |
| Junior Engineer | 120 minutes (160 minutes for eligible PwBD candidates with a Scribe) | 150 questions: General Awareness 15, Physics & Chemistry 15, Basics of Computers and Applications 10, Basics of Environment and Pollution Control 10, Technical Abilities 100. |
| NTPC (Non-Graduate): Commercial cum Ticket Clerk and Junior Clerk cum Typist | 90 minutes (120 minutes for PwBD candidates using a Scribe) | 120 questions of 1 mark each: General Awareness 50, Mathematics 35, General Intelligence and Reasoning 35. |
Given Qualification: Minimum Qualifying Marks and Merit
Check the minimum qualifying marks and merit for Given Qualification in the table below.
| Category | Minimum Percentage of Marks |
|---|---|
| UR | 40% |
| EWS | 40% |
| OBC (Non-Creamy Layer) | 30% |
| SC | 30% |
| ST | 25% |
Given Qualification: Key Details at a Glance
The table below gives the key details at a glance of Given Qualification, as it is given in the source.
| Detail | Information |
|---|---|
| Photograph | Colour passport size photograph, 3.5 cm x 4.5 cm, not older than three months, clear front view without cap and sunglasses; JPEG format, 100 DPI; file size 15 KB to 70 KB |
| Signature | Signed on white paper with a black ink pen within a box of 50 mm x 20 mm; running handwriting, not block letters; JPG/JPEG, 100 DPI; 50 mm x 20 mm or 140 x 60 pixels (preferred); file size 10 KB to 40 KB |
Given Qualification: RRC NCR GDCE Important Links
3 entries are listed for Given Qualification.
- NCR GDCE Apply Online
- NCR GDCE Official Notification PDF
- RRC NCR Official Website
Given Qualification: How Normalization of Marks Works
Because Given Qualification can be held over several shifts, the organisation uses normalization. It adjusts the raw scores so that a candidate is not at a loss only because of a tougher shift.
Your final score for the merit list is the normalized score, not the raw number of correct answers, so do not compare your raw marks with a friend from another shift. Read the exact formula in the official notice.
How to Download OCT Given Qualification Admit Card
- 1
Open the official site
Visit the official OCT website.
- 2
Find the admit card link
Open the notice board or admit card section and pick the link for Given Qualification.
- 3
Sign in
Enter your registration number / roll number and date of birth, then the captcha if asked.
- 4
Check every detail
Verify your name, photo, exam date, shift and centre address.
- 5
Print it
Download the PDF and take at least two clear printouts.
OCT Admit Card Download: Login Details and Common Problems
The admit card of Given Qualification is issued from the official OCT website. Use your application details to log in, then save and print the file clearly.
If the link does not open, try a different browser or device, clear the cache and avoid the peak hours. The organisation often extends the download window.
Details to Check on Your Admit Card
- Your name, roll number, date of birth and category
- Photograph and signature – they should be clear and belong to you
- Exam name, date, shift and reporting time
- Exam centre name and full address
- Instructions and the list of items not allowed inside
- Any space for signature or thumb impression to be filled at the centre
If any detail is wrong or missing, contact the helpline on the admit card at once and keep a screenshot as proof. Do not wait for exam day.
Exam Day Rules and Reporting
Plan your journey a day early. Bus and train delays are not accepted as a reason for late entry.
Keep the bag light. The admit card, a valid photo ID and the permitted stationery are all you usually need; electronic items are often banned.
Exam City Slip and Admit Card: The Difference
Many exams release an exam city intimation slip first. It tells you the city so that you can book travel, but it is not the entry pass. The admit card comes later and has the exact centre, date, shift and reporting time.
If You Cannot Download or Lose the Admit Card
Login problems are usually a wrong date format or a forgotten password. Use the recovery option on the portal or contact the helpline, and keep extra printouts as one may be taken at the exam hall.
Earlier OCT Notifications
Earlier OCT notifications we have tracked, for comparison. Tap a title to open it, or see all OCT updates.
| Update | Type | Posts | Key date |
|---|---|---|---|
| OCT Land Record Assistant (LRA) Admit Card 2026 Out: How to Download | Admit Card | 16 | 31 Oct 2026 |
| OCT 21 Chhattisgarh SAGES 1,812 Various Posts Closing Soon Admit Card 2026 – Download Link | Admit Card | 1812 | 21 Oct 2026 |
| OCT Consolidated Pay (₹/month) Exam Admit Card 2026 | Admit Card | 159 | 17 Oct 2026 |
| OCT 17 UPESSC 2,607 Pravakta (PGT) Exam Admit Card 2026 | Admit Card | 2607 | 21 Oct 2026 |
| OCT 15 Karnataka Prisons Department 869 Jailor, Warder Admit Card 2026 – Download Link | Admit Card | 869 | 15 Oct 2026 |
| OCT Additional Selection Test Admit Card 2026 Out: How to Download | Admit Card | 1465 | 15 Oct 2026 |
Exam Day Checklist
- Carry an original photo ID along with the printout; a phone copy is usually not accepted.
- If your photo is unclear, follow the notice's instructions to get a corrected card before exam day.
- Sign only where the card asks you to, and only in the invigilator's presence if instructed.
- Report any mismatch to the helpline shown on the card immediately and save a screenshot.
- Sleep well and eat light the night before.
OCT Prescribed Qualification Admit Card: Important Links
| Link | Open |
|---|---|
| All OCT updates | Open OCT Recruitment |
| OCT latest jobs | View jobs |
| OCT results | View results |
OCT Prescribed Qualification Admit Card: Frequently Asked Questions
How can I download the OCT Prescribed Qualification admit card?
Open the official website of OCT, click the admit card link, enter your registration number and date of birth, then download and print it.
What should I take to the exam centre?
Take the printed admit card and one original photo ID. Reach the centre early.
What is the official website for OCT Prescribed Qualification?
Use the official website of OCT; the link is given in the Important Links table on this page.
Where can I get the latest Sarkari Result updates of OCT?
SarkariResultHome.com posts every new update of OCT as soon as it is published. Bookmark the site and open it directly to see the newest jobs, admit cards, Sarkari Results and answer keys.
Bookmark SarkariResultHome.com. Every new Sarkari Result, admit card, answer key and Sarkari Naukri update of OCT is posted here first. Type sarkariresulthome.com in your browser or add this page to your phone's home screen, and you will not miss the next one.
Browse More Govt Jobs by Category
About SarkariResultHome.com
SarkariResultHome.com is a free website that brings government job news in one place for students and job seekers across India. We publish new recruitment notices, admit cards, results, answer keys, syllabus and admission forms, and we explain each one in simple English with the important dates, fee, age limit, vacancy and direct links to the official websites. Every post is written in our own words after reading the official notice, so you can save time and apply with confidence.
Disclaimer
SarkariResultHome.com is not a government website and is not connected with any government department, board or recruiting body. We try our best to keep every detail correct, but mistakes can happen. Before you apply or pay any fee, please read the official notification on the organisation's own website. We are not responsible for any loss caused by using the information on this page. We never take money for a job, so please do not trust anyone who asks for it.
SarkariResultHome.com is an independent information website. Notices, names and logos belong to the respective organisations.